![]() In order to use the DisplayText command the DisplayMode must be set to 0 (or optional 1 on LCD displays) or other modes must be disabled before compilation with #undef USE_DISPLAY_MODES1TO5. The string can be prefixed by embedded control commands enclosed in brackets. The command argument is a string that is printed on the display at the current position. ![]() The DisplayText command is used to display text as well as graphics and graphs on LCD, OLED and e-Paper displays (EPD). To use the seven-segment-specific TM1637, TM1638 and MAX7219 Display- commands, set DisplayMode to 0. To display text using DisplayText set DisplayMode to 0, or set DisplayMode to 1 for the HT16K33 dot-matrix display. ![]() The display driver is able to display predefined setups of text or user defined text. See commands page for full list of available Display Commands DisplayMode ~ Interface to virtual display driver with Berry LilyGO T5 4.7" E-Paper display ESP32 device Waveshare E-Paper 4.2" display (black/white, full update) Waveshare E-Paper 2.9" display (black/white, partial update) When second SPI bus on ESP32 is used, SSPI must be defined instead of SPI This feature is included only in -displays.bin Supported Displays ~ DisplayModelÄisplayIliMode 1 for ILI9341 or DisplayIliMode 3 for ILI9342
0 Comments
Leave a Reply. |